Building blended walls with AB Europa Collection - Manufactured by CCI Industries is not any harder than walls using only one block, except that you need to establish a pattern and then stick with it to complete your wall. The sample patterns shown are simple and easy to follow, but the options are endless and limited only to your imagination. Variations in colour can also add another dimension to your wall project, check with your local supply for colour availability. The AB Europa Collection - Manufactured by CCI Industries are manufactured to modular sizes that can be combined with very little cutting or splitting of the blocks. You can use a masonry blade in your circular saw to cut AB blocks. Always use safety goggles and protective gloves whenever splitting or cutting concrete blocks. Follow the standard installation steps to lay out the base and then continue with your selected pattern. Click here to download your free Abbey Blend estimating guide.

(Be advised if you use the estimating guide link you will be leaving our website. To return please use your backspace function)

For any of the Blended walls always start with a bottom course of E (Dover or Stone), this will allow proper compaction and it will be easier to achieve the proper level between the blocks. Start at one end of the wall and place the blocks as shown. Repeat the pattern until your desired wall length is achieved.

Downloads