SECTION 04700: SIMULATED MASONRY (MANUFACTURED STONE VENEER AND TRIM)

PART 1 GENERAL

1.01 SUMMARY

A. Section Includes Simulated Masonry, including manufactured stone and trim

1.02 WARRANTY

A. Project Warranty: Refer to Conditions of the Contract for project warranty provisions

B. Manufacturer’s Warranty: Submit, for Owners acceptance, manufacturer’s standard warranty document executed by an authorized company official.

C. Naturalstone Solutions products are covered for a period of 50 years from the date of purchase when used on a structure that conforms to local building codes and when installed in accordance with the manufacturer’s instructions.

PART 2 PRODUCTS

2.01 MANUFACTURED STONE VENEER

A. Naturalstone Solutions products are designed for interior or exterior nonstructural use as lightweight veneer facing on masonry, metal framed or wood framed construction for architectural aesthetics. No additional foundation or structural support is required. Installation is considerable faster than natural stone and much more affordable.

B. Supplier: CCI Industries Ltd.

Contact: CCI Industries: 16333 – 137 Avenue, Edmonton,AB T5V 1N8; Telephone: 1 (800) 387 5630;
Website: www.cci-industries.com

C. Stone Products and Trim:

1. Naturalstone Solutions will not add to the load bearing capacity of a wall. Products should not be used below the water such as swimming pool liners or other water treatments. To avoid discoloring, products should not be subjected to harsh chemicals such as chlorine, salts, or acids. Products are not designed for flat work such as patio areas that are subject to traffic.

2. Naturalstone Solutions products are cast in uniquely designed molds to produce the texture of natural stone. Each product style is manufactured from a special blend of Portland cement, lightweight aggregates, and Iron oxide pigment to replicate the elegance of natural stone.

3. Naturalstone Solutions special blend of lightweight aggregates significantly reduce the effects of “freeze and thaw” while increasing the compression strength to levels above the industry standards.

4. Styles and Colors:

Ledge – Colorado Buff; Kansas; Colorado Red; Black Forest; Cheyenne, Vail Valley, Georgetown, Arapahoe, Hanover, Shenandoah, Telluride, Alpine, Beaver Creek, Tuscany, Natural, Country, Old World, Wolf Creek, Gold Rundle, Bala

Cobble –Colorado Red; Black Forest; Brown, Cheyenne, Vail Valley, Georgetown, Arapahoe, Shenandoah, Telluride, Alpine, Kentucky, Beaver Creek, Tuscany, Natural, Country, Cumberland, Dover, Gold Rundle, Old World

Fieldstone – Colorado Red; Rustic Buff, Kansas, Tuscany, Vail Valley, Georgetown, Cumberland, Telluride, Beaver Creek, Natural, Old World, Country, Dover, Cheyenne

Moss Rock – Buff, Buff/Sienna, Buff Ledge, Sienna, Sienna Lodge

River Rock – Rio Grande, Arkansas, Alberta

Limestone – Natural, Old World, Dover, Cheyenne, Tuscany, Vail Valley, Georgetown

Stacked Stone – Ponderosa, Nantucket, Slate, Aspen, Gold Rundle, Mountain

SPECIFICATION GUIDE

C. Stone Products and Trim:

1. Post & Wall Caps – Tapered and Flat – Colors: Red, Natural, Brown, & Gray
2. Wainscot Caps – Colors: Red, Natural, Brown, & Gray
3. Keystones – Large & Small – Colors: Red, Natural, Brown, & Gray
4. Address Plaques – Standard & Large – Colors: Red, Natural, Brown, & Gray
5. Trim Stones – Colors: Red, Natural, Brown, & Gray
6. Electrical and Light Plaques – available in colors to match each of the individual stone patterns
7. Hearthstones – Colors: Red, Natural, Brown, & Gray

Note:

Please refer to the accessory selection guide for available sizes

 

2.02 PRODUCT SUBSTITUTIONS

A. Substitutions: No Substitutions permitted.

2.03 RELATED MATERIALS

A. Mortar:

1. Portland Cement, ASTM C150, Type 1 or masonry cement (Type S), ASTM c91

2. Masonry sand

3. Lime: ASTM C207

4. Iron Oxide Pigment

B. Moisture Resistant Barrier: Kraft waterproof building paper,
UBC Std. NO. 14-1 or ASTM D226 for Type 1 felt

C. Metal Lath: Galvanized 2.5 lb. flat diamond mesh

2.04 MORTAR MIXES

A. Mix materials in accordance with manufacturers instructions. Thoroughly mix mortar ingredients in quantities needed for immediate use in accordance with ASTM C270, Type S. Do not use antifreeze to lower the freezing point of the mortar.

PART 3 EXECUTION

3.01 MANUFACTURER’S INSTRUCTIONS.

A.	Comply with supplier’s/manufacturer’s installation instructions.